Networking between E1000 terminals using BDTP Technology.
1. Material Requirement
The required material for the setup is as follows
Sr. no. | Material |
1 | PLC Type : FX Series |
2 | CPU : FX2N |
3 | PLC S/W : GX Developer Ver. 8.45X |
4 | HMI : E1041,E1043 |
5 | Other |
2. Diagram
Network communication via BDTP is used to connect two or more E1000-series operator terminals to one or two controllers or several operator terminals to two or more controllers, with retained performance.
 |
| Figure 1 Networking between E �Terminals using BDTP Technology |
Cables
The required cables are as follows
Sr. no. | Item | Description |
1 | Medoc cable | Prog. cable for FX PLC |
2 | Ethernet Cross Cable | Comm. Cable for E-Terminal to E-Terminal & PLC*1 |
*1 To connect the E-Terminal to E-Terminal if HUB is used then Serial Straight cable is used.
4. E-Designer Program Setting
Set IP 192.168.1.1 of BDTP Server in Peripheral Configuration as below.
 |
| Fig: Peripheral Configuration of BDTP Server |
Network Connection/Network services:
Select Network Services, Select BDTP Server to edit Max Client.
 |
| Fig. Network Connection of BDTP Server |
 |
| Fig. Network services of BDTP Server |
5. BDTP Client Setting
Set IP 192.168.1.2 of BDTP Client as below
 |
| Fig: Peripheral Configuration of BDTP Client |
5. BDTP Client Setting
For the network service BDTP Client, the IP Addresses for the BDTP Servers in the network from which the client is to collect information are defined. Select BDTP Clientin the list and click Edit to enter the settings.
 |
| Fig. Network services of BDTP Client |
Update Contact :
No Wa/Telepon (puat) : 085267792168
No Wa/Telepon (fajar) : 085369237896
Email : Fajarudinsidik@gmail.com
No Wa/Telepon (puat) : 085267792168
No Wa/Telepon (fajar) : 085369237896
Email: Fajarudinsidik@gmail.com
atau Kirimkan Private messanger melalui email dengan klik tombol order dibawah ini :
